Home > CORVETTE CAI's > C5 (1997 - 2004) > '01-'04 LS6 Z06 >

Halltech Honeycomb™1/8" Cell Laminar Flow Straightener
Halltech Honeycomb™1/8" Cell Laminar Flow Straightener
Honeycomb™ Air Straightener
  
Alternative Views:
$49.99


Availability: Usually Ships in 1 to 2 Days
Product Code: HC.125
Qty:

Description
 
Halltech Honeycomb 1/8" Cell Laminar Flow Straightener is a direct 1 minute plug and play high flow straightener designed for the C5 Corvette style Delphi MAF meter; It also fits the 2005-2007 C6 base car LS2 (not the LS7). This unit will eliminate lean codes on the 2001-2004 C5 Z06 in all aftermarket intake applications. It can also replace the 1/16" honeycell on the LS1-LS2 MAF, which is very restrictive. (See Larger Pics section) These aluminum honeycomb screens are very fragile and cannot be returned.

Interestingly, this eliminates lean codes on many intakes made by Vararam, and other turbulent bottom breathers. The two MAFs shown in the picture are for illustration of stock vs. our honeycomb flow straightener. You are purchasing only the honeycomb and using your stock MAF meter.

  • Fits ALL Delphi 85 MAF sensors
  • Completely eliminates lead codes common with aftermarket intakes when used on the C5 Z06
  • Eliminates surging caused by turbulence at the MAF on the 01-04 C5 Z06
  • 94mm diameter, aluminum honeycomb 6mm thick structure
  • Easy to install in 1 minute (click LINK for instructions)

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 4 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Halltech Honeycomb 1/8" Cell Laminar Flow Straight June 8, 2022
Reviewer: BigJoe from miami, FL United States  
The Halltech Honeycomb 1/8" Cell Laminar Flow Straightener was easy to install after removing the factory one, since I did not have any previous lean codes, and running a CAI,the purpose of this mod was to allow more air pass through,reduce turbulence, and the restrictiveness of the factory screen, the result was elimination of a slight hesitation I was getting when my automatic was downshifting at certain times, I definitely highly recommend this product if you are running a CAI

Was this review helpful to you?

  4 of 4 people found the following review helpful:
 
5 of 5 Best product you can buy for a C5. November 11, 2013
Reviewer: Jack from South Carolina  
This is the best part you can buy for $50. If you have a Cold Air Intake installed the Halltech Honeycomb is a must have. If you are tired of lean codes and the occasional surging this will do the trick. Great product and engineering.

Was this review helpful to you?

  4 of 4 people found the following review helpful:
 
5 of 5 Halltech Honeycomb 1/8" Flow Straightener May 21, 2012
Reviewer: Curtis wilson from omaha, NE United States  
I just installed this in my 03 Z06 that I also installed a Vara ram cold unit some time ago. Had lean codes quite often . Just drove it about 40 mile, NO CODES......and the performance is much better, will up date later.           Thanks for the great part!!!!!
                                        Curt




Was this review helpful to you?

  5 of 5 people found the following review helpful:
 
5 of 5 Testimonials from 10 customers June 27, 2009
Reviewer: Jim Hall from Oconomowoc, WI United States  
http://www.corvetteLS7.com/MAF screens.pdf

Was this review helpful to you?


Browse for more products in the same category as this item:

CORVETTE CAI's > C5 (1997 - 2004) > '01-'04 LS6 Z06
CORVETTE CAI's > C5 (1997 - 2004)
CORVETTE CAI's > C5 (1997 - 2004) > '01-'04 LS1