Home > CORVETTE CAI's > C5 (1997 - 2004) > '01-'04 LS6 Z06 >


Halltech Honeycomb™1/8" Cell Laminar Flow Straightener
Honeycomb™ Air Straightener
Larger Photo Email A Friend
 



Halltech Honeycomb™1/8" Cell Laminar Flow Straightener
4 Reviews
$49.99


Availability: Usually Ships in 1 to 2 Days
Product Code: HC.125
Qty:

Description
 
Halltech Honeycomb 1/8" Cell Laminar Flow Straightener is a direct 1 minute plug and play high flow straightener designed for the C5 Corvette style Delphi MAF meter; It also fits the 2005-2007 C6 base car LS2 (not the LS7). This unit will eliminate lean codes on the 2001-2004 C5 Z06 in all aftermarket intake applications. It can also replace the 1/16" honeycell on the LS1-LS2 MAF, which is very restrictive. (See Larger Pics section) These aluminum honeycomb screens are very fragile and cannot be returned.

Interestingly, this eliminates lean codes on many intakes made by Vararam, and other turbulent bottom breathers. The two MAFs shown in the picture are for illustration of stock vs. our honeycomb flow straightener. You are purchasing only the honeycomb and using your stock MAF meter.

  • Fits ALL Delphi 85 MAF sensors
  • Completely eliminates lead codes common with aftermarket intakes when used on the C5 Z06
  • Eliminates surging caused by turbulence at the MAF on the 01-04 C5 Z06
  • 94mm diameter, aluminum honeycomb 6mm thick structure
  • Easy to install in 1 minute (click LINK for instructions)

Your Rating:
Rating:
4Reviews
BigJoemiami, FL United States 1 of 1 people found the following review helpful:
June 8, 2022

Halltech Honeycomb 1/8" Cell Laminar Flow Straight

The Halltech Honeycomb 1/8" Cell Laminar Flow Straightener was easy to install after removing the factory one, since I did not have any previous lean codes, and running a CAI,the purpose of this mod was to allow more air pass through,reduce turbulence, and the restrictiveness of the factory screen, the result was elimination of a slight hesitation I was getting when my automatic was downshifting at certain times, I definitely highly recommend this product if you are running a CAI

JackSouth Carolina 4 of 4 people found the following review helpful:
November 11, 2013

Best product you can buy for a C5.

This is the best part you can buy for $50. If you have a Cold Air Intake installed the Halltech Honeycomb is a must have. If you are tired of lean codes and the occasional surging this will do the trick. Great product and engineering.

Curtis wilsonomaha, NE United States 4 of 4 people found the following review helpful:
May 21, 2012

Halltech Honeycomb 1/8" Flow Straightener

I just installed this in my 03 Z06 that I also installed a Vara ram cold unit some time ago. Had lean codes quite often . Just drove it about 40 mile, NO CODES......and the performance is much better, will up date later.           Thanks for the great part!!!!!Curt

Jim HallOconomowoc, WI United States 5 of 5 people found the following review helpful:
June 27, 2009

Testimonials from 10 customers

http://www.corvetteLS7.com/MAF screens.pdf


 
 

 
 

 
 

 
 


Browse for more products in the same category as this item:

CORVETTE CAI's > C5 (1997 - 2004) > '01-'04 LS6 Z06
CORVETTE CAI's > C5 (1997 - 2004)
CORVETTE CAI's > C5 (1997 - 2004) > '01-'04 LS1